1986 Mercedes-Benz 560 vs. 2010 Lancia Ypsilon
To start off, 2010 Lancia Ypsilon is newer by 24 year(s). Which means there will be less support and parts availability for 1986 Mercedes-Benz 560. In addition, the cost of maintenance, including insurance, on 1986 Mercedes-Benz 560 would be higher. At 5,547 cc (8 cylinders), 1986 Mercedes-Benz 560 is equipped with a bigger engine. In terms of performance, 1986 Mercedes-Benz 560 (296 HP @ 5000 RPM) has 237 more horse power than 2010 Lancia Ypsilon. (59 HP @ 5000 RPM). In normal driving conditions, 1986 Mercedes-Benz 560 should accelerate faster than 2010 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 1986 Mercedes-Benz 560 weights approximately 728 kg more than 2010 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1986 Mercedes-Benz 560 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Mercedes-Benz 560. However, in wet, icy, snow, or gravel driving conditions, 2010 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mercedes-Benz 560 (464 Nm @ 3750 RPM) has 362 more torque (in Nm) than 2010 Lancia Ypsilon. (102 Nm @ 2500 RPM). This means 1986 Mercedes-Benz 560 will have an easier job in driving up hills or pulling heavy equipment than 2010 Lancia Ypsilon. 1986 Mercedes-Benz 560 has automatic transmission and 2010 Lancia Ypsilon has manual transmission. 2010 Lancia Ypsilon will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Mercedes-Benz 560 will be easier to drive especially in heavy traffic.
Compare all specifications:
1986 Mercedes-Benz 560 | 2010 Lancia Ypsilon | |
Make | Mercedes-Benz | Lancia |
Model | 560 | Ypsilon |
Year Released | 1986 | 2010 |
Engine Position | Front | Front |
Engine Size | 5547 cc | 1242 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 296 HP | 59 HP |
Engine RPM | 5000 RPM | 5000 RPM |
Torque | 464 Nm | 102 Nm |
Torque RPM | 3750 RPM | 2500 RPM |
Engine Bore Size | 96.5 mm | 70.8 mm |
Engine Stroke Size | 94.8 mm | 78.9 mm |
Fuel Type | Gasoline | Gasoline - Premium |
Top Speed | 251 km/hour | 153 km/hour |
Acceleration 0-100mph | 6.8 seconds | 16.8 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 1748 kg | 1020 kg |
Vehicle Length | 5070 mm | 3780 mm |
Vehicle Width | 1840 mm | 1710 mm |
Vehicle Height | 1420 mm | 1540 mm |
Wheelbase Size | 2850 mm | 2390 mm |