1986 Mercedes-Benz 560 vs. 2012 Fiat Panda
To start off, 2012 Fiat Panda is newer by 26 year(s). Which means there will be less support and parts availability for 1986 Mercedes-Benz 560. In addition, the cost of maintenance, including insurance, on 1986 Mercedes-Benz 560 would be higher. At 5,547 cc (8 cylinders), 1986 Mercedes-Benz 560 is equipped with a bigger engine. In terms of performance, 1986 Mercedes-Benz 560 (142 HP @ 4750 RPM) has 70 more horse power than 2012 Fiat Panda. (72 HP @ 6000 RPM). In normal driving conditions, 1986 Mercedes-Benz 560 should accelerate faster than 2012 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1986 Mercedes-Benz 560 weights approximately 569 kg more than 2012 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1986 Mercedes-Benz 560 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Mercedes-Benz 560. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mercedes-Benz 560 (454 Nm @ 3250 RPM) has 323 more torque (in Nm) than 2012 Fiat Panda. (131 Nm @ 4250 RPM). This means 1986 Mercedes-Benz 560 will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat Panda. 1986 Mercedes-Benz 560 has automatic transmission and 2012 Fiat Panda has manual transmission. 2012 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Mercedes-Benz 560 will be easier to drive especially in heavy traffic.
Compare all specifications:
1986 Mercedes-Benz 560 | 2012 Fiat Panda | |
Make | Mercedes-Benz | Fiat |
Model | 560 | Panda |
Year Released | 1986 | 2012 |
Engine Position | Front | Front |
Engine Size | 5547 cc | 1368 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 142 HP | 72 HP |
Engine RPM | 4750 RPM | 6000 RPM |
Torque | 454 Nm | 131 Nm |
Torque RPM | 3250 RPM | 4250 RPM |
Engine Bore Size | 96.5 mm | 72 mm |
Engine Stroke Size | 94.8 mm | 84 mm |
Engine Compression Ratio | 9.0:1 | 11.0:1 |
Top Speed | 240 km/hour | 185 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1619 kg | 1050 kg |
Vehicle Length | 4590 mm | 3580 mm |
Vehicle Width | 1800 mm | 1610 mm |
Vehicle Height | 1300 mm | 1570 mm |
Wheelbase Size | 2460 mm | 2310 mm |