1986 Nissan Pulsar vs. 2013 Nissan Sentra

To start off, 2013 Nissan Sentra is newer by 27 year(s). Which means there will be less support and parts availability for 1986 Nissan Pulsar. In addition, the cost of maintenance, including insurance, on 1986 Nissan Pulsar would be higher. At 1,800 cc (4 cylinders), 2013 Nissan Sentra is equipped with a bigger engine. In terms of performance, 2013 Nissan Sentra (128 HP @ 6000 RPM) has 69 more horse power than 1986 Nissan Pulsar. (59 HP @ 5600 RPM) In normal driving conditions, 2013 Nissan Sentra should accelerate faster than 1986 Nissan Pulsar. With that said, vehicle weight also plays an important factor in acceleration. 2013 Nissan Sentra weights approximately 410 kg more than 1986 Nissan Pulsar. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Nissan Sentra (174 Nm @ 3600 RPM) has 77 more torque (in Nm) than 1986 Nissan Pulsar. (97 Nm @ 3600 RPM). This means 2013 Nissan Sentra will have an easier job in driving up hills or pulling heavy equipment than 1986 Nissan Pulsar.

Compare all specifications:

1986 Nissan Pulsar 2013 Nissan Sentra
Make Nissan Nissan
Model Pulsar Sentra
Year Released 1986 2013
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 1270 cc 1800 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 59 HP 128 HP
Engine RPM 5600 RPM 6000 RPM
Torque 97 Nm 174 Nm
Torque RPM 3600 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual CVT
Vehicle Weight 880 kg 1290 kg
Vehicle Length 4140 mm 4625 mm
Vehicle Width 1630 mm 1760 mm
Vehicle Height 1400 mm 1496 mm
Wheelbase Size 2420 mm 2700 mm