1986 Peugeot 505 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 24 year(s). Which means there will be less support and parts availability for 1986 Peugeot 505. In addition, the cost of maintenance, including insurance, on 1986 Peugeot 505 would be higher. At 3,518 cc (6 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (235 HP @ 6400 RPM) has 129 more horse power than 1986 Peugeot 505. (106 HP @ 5250 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1986 Peugeot 505. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 573 kg more than 1986 Peugeot 505. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1986 Peugeot 505 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Peugeot 505. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (315 Nm @ 4000 RPM) has 154 more torque (in Nm) than 1986 Peugeot 505. (161 Nm @ 3000 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1986 Peugeot 505. 2010 Chrysler Sebring has automatic transmission and 1986 Peugeot 505 has manual transmission. 1986 Peugeot 505 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1986 Peugeot 505 | 2010 Chrysler Sebring | |
Make | Peugeot | Chrysler |
Model | 505 | Sebring |
Year Released | 1986 | 2010 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 3518 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 106 HP | 235 HP |
Engine RPM | 5250 RPM | 6400 RPM |
Torque | 161 Nm | 315 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Vehicle Weight | 1300 kg | 1873 kg |
Vehicle Length | 4910 mm | 4930 mm |
Vehicle Width | 1760 mm | 1820 mm |
Vehicle Height | 1550 mm | 1490 mm |
Wheelbase Size | 2910 mm | 2770 mm |