1986 Toyota Camry vs. 1999 Ford Contour

To start off, 1999 Ford Contour is newer by 13 year(s). Which means there will be less support and parts availability for 1986 Toyota Camry. In addition, the cost of maintenance, including insurance, on 1986 Toyota Camry would be higher. At 1,989 cc (4 cylinders), 1999 Ford Contour is equipped with a bigger engine. In terms of performance, 1999 Ford Contour (128 HP @ 5500 RPM) has 39 more horse power than 1986 Toyota Camry. (89 HP @ 5200 RPM) In normal driving conditions, 1999 Ford Contour should accelerate faster than 1986 Toyota Camry. With that said, vehicle weight also plays an important factor in acceleration. 1999 Ford Contour weights approximately 162 kg more than 1986 Toyota Camry. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Ford Contour (175 Nm @ 4000 RPM) has 32 more torque (in Nm) than 1986 Toyota Camry. (143 Nm @ 3400 RPM). This means 1999 Ford Contour will have an easier job in driving up hills or pulling heavy equipment than 1986 Toyota Camry.

Compare all specifications:

1986 Toyota Camry 1999 Ford Contour
Make Toyota Ford
Model Camry Contour
Year Released 1986 1999
Body Type Station Wagon Sedan
Engine Position Front Front
Engine Size 1832 cc 1989 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 89 HP 128 HP
Engine RPM 5200 RPM 5500 RPM
Torque 143 Nm 175 Nm
Torque RPM 3400 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1080 kg 1242 kg
Vehicle Length 4420 mm 4680 mm
Vehicle Width 1700 mm 1760 mm
Vehicle Height 1380 mm 1380 mm
Wheelbase Size 2610 mm 2710 mm