1987 Alfa Romeo Graduate vs. 1980 Honda Accord
To start off, 1987 Alfa Romeo Graduate is newer by 7 year(s). Which means there will be less support and parts availability for 1980 Honda Accord. In addition, the cost of maintenance, including insurance, on 1980 Honda Accord would be higher. At 1,966 cc (4 cylinders), 1987 Alfa Romeo Graduate is equipped with a bigger engine. In terms of performance, 1987 Alfa Romeo Graduate (115 HP) has 35 more horse power than 1980 Honda Accord. (80 HP). In normal driving conditions, 1987 Alfa Romeo Graduate should accelerate faster than 1980 Honda Accord. With that said, vehicle weight also plays an important factor in acceleration. 1987 Alfa Romeo Graduate weights approximately 320 kg more than 1980 Honda Accord. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1987 Alfa Romeo Graduate is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1987 Alfa Romeo Graduate. However, in wet, icy, snow, or gravel driving conditions, 1980 Honda Accord, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Alfa Romeo Graduate (163 Nm) has 37 more torque (in Nm) than 1980 Honda Accord. (126 Nm). This means 1987 Alfa Romeo Graduate will have an easier job in driving up hills or pulling heavy equipment than 1980 Honda Accord. 1980 Honda Accord has automatic transmission and 1987 Alfa Romeo Graduate has manual transmission. 1987 Alfa Romeo Graduate will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Honda Accord will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1987 Alfa Romeo Graduate | 1980 Honda Accord | |
| Make | Alfa Romeo | Honda |
| Model | Graduate | Accord |
| Year Released | 1987 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 1966 cc | 1601 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 115 HP | 80 HP |
| Torque | 163 Nm | 126 Nm |
| Engine Bore Size | 84.1 mm | 77 mm |
| Engine Stroke Size | 88.4 mm | 86 mm |
| Engine Compression Ratio | 9.0:1 | 8.4:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Vehicle Weight | 1250 kg | 930 kg |
| Vehicle Length | 4290 mm | 4350 mm |
| Vehicle Width | 1630 mm | 1630 mm |
| Vehicle Height | 1250 mm | 1340 mm |
| Wheelbase Size | 2260 mm | 2390 mm |
| Fuel Tank Capacity | 49 L | 50 L |
