1987 Alfa Romeo Graduate vs. 2010 Hyundai ix20
To start off, 2010 Hyundai ix20 is newer by 23 year(s). Which means there will be less support and parts availability for 1987 Alfa Romeo Graduate. In addition, the cost of maintenance, including insurance, on 1987 Alfa Romeo Graduate would be higher. At 1,966 cc (4 cylinders), 1987 Alfa Romeo Graduate is equipped with a bigger engine. In terms of performance, 2010 Hyundai ix20 (122 HP) has 7 more horse power than 1987 Alfa Romeo Graduate. (115 HP) In normal driving conditions, 2010 Hyundai ix20 should accelerate faster than 1987 Alfa Romeo Graduate. With that said, vehicle weight also plays an important factor in acceleration. 2010 Hyundai ix20 weights approximately 44 kg more than 1987 Alfa Romeo Graduate. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1987 Alfa Romeo Graduate is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1987 Alfa Romeo Graduate. However, in wet, icy, snow, or gravel driving conditions, 2010 Hyundai ix20, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Alfa Romeo Graduate (163 Nm) has 7 more torque (in Nm) than 2010 Hyundai ix20. (156 Nm). This means 1987 Alfa Romeo Graduate will have an easier job in driving up hills or pulling heavy equipment than 2010 Hyundai ix20. 2010 Hyundai ix20 has automatic transmission and 1987 Alfa Romeo Graduate has manual transmission. 1987 Alfa Romeo Graduate will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Hyundai ix20 will be easier to drive especially in heavy traffic.
Compare all specifications:
1987 Alfa Romeo Graduate | 2010 Hyundai ix20 | |
Make | Alfa Romeo | Hyundai |
Model | Graduate | ix20 |
Year Released | 1987 | 2010 |
Engine Position | Front | Front |
Engine Size | 1966 cc | 1591 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 115 HP | 122 HP |
Torque | 163 Nm | 156 Nm |
Engine Bore Size | 84.1 mm | 77 mm |
Engine Stroke Size | 88.4 mm | 85.4 mm |
Engine Compression Ratio | 9.0:1 | 10.5:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 1250 kg | 1294 kg |
Vehicle Length | 4290 mm | 4100 mm |
Vehicle Width | 1630 mm | 1765 mm |
Vehicle Height | 1250 mm | 1600 mm |
Wheelbase Size | 2260 mm | 2615 mm |