1987 Alfa Romeo Graduate vs. 2010 Rolls-Royce Phantom Drophead Coupe
To start off, 2010 Rolls-Royce Phantom Drophead Coupe is newer by 23 year(s). Which means there will be less support and parts availability for 1987 Alfa Romeo Graduate. In addition, the cost of maintenance, including insurance, on 1987 Alfa Romeo Graduate would be higher. At 6,700 cc (12 cylinders), 2010 Rolls-Royce Phantom Drophead Coupe is equipped with a bigger engine. In terms of performance, 2010 Rolls-Royce Phantom Drophead Coupe (453 HP) has 338 more horse power than 1987 Alfa Romeo Graduate. (115 HP) In normal driving conditions, 2010 Rolls-Royce Phantom Drophead Coupe should accelerate faster than 1987 Alfa Romeo Graduate. With that said, vehicle weight also plays an important factor in acceleration. 2010 Rolls-Royce Phantom Drophead Coupe weights approximately 1420 kg more than 1987 Alfa Romeo Graduate. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Rolls-Royce Phantom Drophead Coupe (719 Nm) has 556 more torque (in Nm) than 1987 Alfa Romeo Graduate. (163 Nm). This means 2010 Rolls-Royce Phantom Drophead Coupe will have an easier job in driving up hills or pulling heavy equipment than 1987 Alfa Romeo Graduate. 2010 Rolls-Royce Phantom Drophead Coupe has automatic transmission and 1987 Alfa Romeo Graduate has manual transmission. 1987 Alfa Romeo Graduate will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Rolls-Royce Phantom Drophead Coupe will be easier to drive especially in heavy traffic.
Compare all specifications:
1987 Alfa Romeo Graduate | 2010 Rolls-Royce Phantom Drophead Coupe | |
Make | Alfa Romeo | Rolls-Royce |
Model | Graduate | Phantom Drophead Coupe |
Year Released | 1987 | 2010 |
Engine Position | Front | Front |
Engine Size | 1966 cc | 6700 cc |
Engine Cylinders | 4 cylinders | 12 cylinders |
Engine Type | in-line | V |
Horse Power | 115 HP | 453 HP |
Torque | 163 Nm | 719 Nm |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 4 seats |
Vehicle Weight | 1250 kg | 2670 kg |
Vehicle Length | 4290 mm | 5608 mm |
Vehicle Width | 1630 mm | 1986 mm |
Vehicle Height | 1250 mm | 1580 mm |
Wheelbase Size | 2260 mm | 3320 mm |
Fuel Tank Capacity | 49 L | 80 L |