1987 Alfa Romeo Graduate vs. 2013 Hyundai Santa Fe
To start off, 2013 Hyundai Santa Fe is newer by 26 year(s). Which means there will be less support and parts availability for 1987 Alfa Romeo Graduate. In addition, the cost of maintenance, including insurance, on 1987 Alfa Romeo Graduate would be higher. At 1,998 cc (4 cylinders), 2013 Hyundai Santa Fe is equipped with a bigger engine. In terms of performance, 2013 Hyundai Santa Fe (260 HP) has 145 more horse power than 1987 Alfa Romeo Graduate. (115 HP) In normal driving conditions, 2013 Hyundai Santa Fe should accelerate faster than 1987 Alfa Romeo Graduate. With that said, vehicle weight also plays an important factor in acceleration. 2013 Hyundai Santa Fe weights approximately 440 kg more than 1987 Alfa Romeo Graduate. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1987 Alfa Romeo Graduate is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1987 Alfa Romeo Graduate. However, in wet, icy, snow, or gravel driving conditions, 2013 Hyundai Santa Fe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Hyundai Santa Fe (365 Nm) has 202 more torque (in Nm) than 1987 Alfa Romeo Graduate. (163 Nm). This means 2013 Hyundai Santa Fe will have an easier job in driving up hills or pulling heavy equipment than 1987 Alfa Romeo Graduate. 2013 Hyundai Santa Fe has automatic transmission and 1987 Alfa Romeo Graduate has manual transmission. 1987 Alfa Romeo Graduate will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Hyundai Santa Fe will be easier to drive especially in heavy traffic.
Compare all specifications:
1987 Alfa Romeo Graduate | 2013 Hyundai Santa Fe | |
Make | Alfa Romeo | Hyundai |
Model | Graduate | Santa Fe |
Year Released | 1987 | 2013 |
Engine Position | Front | Front |
Engine Size | 1966 cc | 1998 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 115 HP | 260 HP |
Torque | 163 Nm | 365 Nm |
Engine Bore Size | 84.1 mm | 86 mm |
Engine Stroke Size | 88.4 mm | 86 mm |
Engine Compression Ratio | 9.0:1 | 9.5:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 1250 kg | 1690 kg |
Vehicle Length | 4290 mm | 4690 mm |
Vehicle Width | 1630 mm | 1880 mm |
Vehicle Height | 1250 mm | 1690 mm |
Wheelbase Size | 2260 mm | 2700 mm |
Fuel Tank Capacity | 49 L | 66 L |