1987 Alpine V6 vs. 1980 Lancia Beta

To start off, 1987 Alpine V6 is newer by 7 year(s). Which means there will be less support and parts availability for 1980 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1980 Lancia Beta would be higher. At 2,457 cc (6 cylinders), 1987 Alpine V6 is equipped with a bigger engine. In terms of performance, 1987 Alpine V6 (197 HP @ 5750 RPM) has 79 more horse power than 1980 Lancia Beta. (118 HP @ 6000 RPM). In normal driving conditions, 1987 Alpine V6 should accelerate faster than 1980 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 1987 Alpine V6 weights approximately 120 kg more than 1980 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Alpine V6 (296 Nm @ 2500 RPM) has 131 more torque (in Nm) than 1980 Lancia Beta. (165 Nm @ 3500 RPM). This means 1987 Alpine V6 will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Beta.

Compare all specifications:

1987 Alpine V6 1980 Lancia Beta
Make Alpine Lancia
Model V6 Beta
Year Released 1987 1980
Engine Position Rear Middle
Engine Size 2457 cc 1993 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 197 HP 118 HP
Engine RPM 5750 RPM 6000 RPM
Torque 296 Nm 165 Nm
Torque RPM 2500 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1180 kg 1060 kg
Vehicle Length 4320 mm 3820 mm
Vehicle Width 1760 mm 1710 mm
Vehicle Height 1210 mm 1200 mm
Wheelbase Size 2350 mm 2360 mm