1987 Audi 200 vs. 1988 BMW 525
To start off, 1988 BMW 525 is newer by 1 year(s). Which means there will be less support and parts availability for 1987 Audi 200. In addition, the cost of maintenance, including insurance, on 1987 Audi 200 would be higher. At 2,443 cc (6 cylinders), 1988 BMW 525 is equipped with a bigger engine. In terms of performance, 1987 Audi 200 (503 HP @ 7500 RPM) has 335 more horse power than 1988 BMW 525. (168 HP @ 5800 RPM). In normal driving conditions, 1987 Audi 200 should accelerate faster than 1988 BMW 525. With that said, vehicle weight also plays an important factor in acceleration. 1988 BMW 525 weights approximately 345 kg more than 1987 Audi 200.
Because 1987 Audi 200 is four wheel drive (4WD), it will have significant more traction and grip than 1988 BMW 525. In wet, icy, snow, or gravel driving conditions, 1987 Audi 200 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Audi 200 (501 Nm @ 6000 RPM) has 275 more torque (in Nm) than 1988 BMW 525. (226 Nm @ 4000 RPM). This means 1987 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 1988 BMW 525.
Compare all specifications:
1987 Audi 200 | 1988 BMW 525 | |
Make | Audi | BMW |
Model | 200 | 525 |
Year Released | 1987 | 1988 |
Engine Position | Front | Front |
Engine Size | 2110 cc | 2443 cc |
Engine Cylinders | 5 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 503 HP | 168 HP |
Engine RPM | 7500 RPM | 5800 RPM |
Torque | 501 Nm | 226 Nm |
Torque RPM | 6000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1115 kg | 1460 kg |
Vehicle Length | 4900 mm | 4730 mm |
Vehicle Width | 2040 mm | 1760 mm |
Vehicle Height | 1350 mm | 1420 mm |
Wheelbase Size | 2690 mm | 2770 mm |