1987 Chrysler TC vs. 2000 Mazda 323
To start off, 2000 Mazda 323 is newer by 13 year(s). Which means there will be less support and parts availability for 1987 Chrysler TC. In addition, the cost of maintenance, including insurance, on 1987 Chrysler TC would be higher. At 2,213 cc (4 cylinders), 1987 Chrysler TC is equipped with a bigger engine. In terms of performance, 1987 Chrysler TC (202 HP) has 128 more horse power than 2000 Mazda 323. (74 HP). In normal driving conditions, 1987 Chrysler TC should accelerate faster than 2000 Mazda 323. With that said, vehicle weight also plays an important factor in acceleration. 1987 Chrysler TC weights approximately 327 kg more than 2000 Mazda 323. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Chrysler TC (298 Nm @ 3400 RPM) has 189 more torque (in Nm) than 2000 Mazda 323. (109 Nm @ 4000 RPM). This means 1987 Chrysler TC will have an easier job in driving up hills or pulling heavy equipment than 2000 Mazda 323.
Compare all specifications:
1987 Chrysler TC | 2000 Mazda 323 | |
Make | Chrysler | Mazda |
Model | TC | 323 |
Year Released | 1987 | 2000 |
Engine Position | Front | Front |
Engine Size | 2213 cc | 1324 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 202 HP | 74 HP |
Torque | 298 Nm | 109 Nm |
Torque RPM | 3400 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1474 kg | 1147 kg |
Vehicle Length | 4470 mm | 4210 mm |
Vehicle Width | 1750 mm | 1710 mm |
Vehicle Height | 1320 mm | 1420 mm |
Wheelbase Size | 2370 mm | 2850 mm |