1987 Daihatsu Charade vs. 2005 Fiat Panda
To start off, 2005 Fiat Panda is newer by 18 year(s). Which means there will be less support and parts availability for 1987 Daihatsu Charade. In addition, the cost of maintenance, including insurance, on 1987 Daihatsu Charade would be higher. At 1,108 cc (4 cylinders), 2005 Fiat Panda is equipped with a bigger engine. In terms of performance, 1987 Daihatsu Charade (66 HP) has 12 more horse power than 2005 Fiat Panda. (54 HP). In normal driving conditions, 1987 Daihatsu Charade should accelerate faster than 2005 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2005 Fiat Panda weights approximately 58 kg more than 1987 Daihatsu Charade.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Daihatsu Charade (106 Nm @ 3200 RPM) has 18 more torque (in Nm) than 2005 Fiat Panda. (88 Nm @ 2750 RPM). This means 1987 Daihatsu Charade will have an easier job in driving up hills or pulling heavy equipment than 2005 Fiat Panda.
Compare all specifications:
1987 Daihatsu Charade | 2005 Fiat Panda | |
Make | Daihatsu | Fiat |
Model | Charade | Panda |
Year Released | 1987 | 2005 |
Engine Position | Front | Front |
Engine Size | 993 cc | 1108 cc |
Engine Cylinders | 3 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 66 HP | 54 HP |
Torque | 106 Nm | 88 Nm |
Torque RPM | 3200 RPM | 2750 RPM |
Engine Bore Size | 76.1 mm | 70 mm |
Engine Stroke Size | 73 mm | 72 mm |
Engine Compression Ratio | 8.0:1 | 10.0:1 |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 782 kg | 840 kg |
Vehicle Length | 3610 mm | 3540 mm |
Vehicle Width | 1620 mm | 1580 mm |
Vehicle Height | 1400 mm | 1550 mm |
Wheelbase Size | 2350 mm | 2310 mm |