1987 Daihatsu Cuore vs. 1987 Honda Integra
To start off, both 1987 Daihatsu Cuore and 1987 Honda Integra were released in the same year (1987). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,590 cc (4 cylinders), 1987 Honda Integra is equipped with a bigger engine. In terms of performance, 1987 Honda Integra (125 HP @ 6500 RPM) has 82 more horse power than 1987 Daihatsu Cuore. (43 HP @ 5500 RPM) In normal driving conditions, 1987 Honda Integra should accelerate faster than 1987 Daihatsu Cuore. With that said, vehicle weight also plays an important factor in acceleration. 1987 Honda Integra weights approximately 420 kg more than 1987 Daihatsu Cuore. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Honda Integra (139 Nm @ 5500 RPM) has 71 more torque (in Nm) than 1987 Daihatsu Cuore. (68 Nm @ 3200 RPM). This means 1987 Honda Integra will have an easier job in driving up hills or pulling heavy equipment than 1987 Daihatsu Cuore.
Compare all specifications:
1987 Daihatsu Cuore | 1987 Honda Integra | |
Make | Daihatsu | Honda |
Model | Cuore | Integra |
Year Released | 1987 | 1987 |
Engine Position | Front | Front |
Engine Size | 847 cc | 1590 cc |
Engine Cylinders | 3 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 43 HP | 125 HP |
Engine RPM | 5500 RPM | 6500 RPM |
Torque | 68 Nm | 139 Nm |
Torque RPM | 3200 RPM | 5500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Vehicle Weight | 600 kg | 1020 kg |
Vehicle Length | 3200 mm | 4350 mm |
Vehicle Width | 1410 mm | 1670 mm |
Vehicle Height | 1370 mm | 1350 mm |
Wheelbase Size | 2160 mm | 2460 mm |