1987 Mercedes-Benz 300 vs. 2010 Honda Jazz

To start off, 2010 Honda Jazz is newer by 23 year(s). Which means there will be less support and parts availability for 1987 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1987 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1987 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1987 Mercedes-Benz 300 (185 HP) has 108 more horse power than 2010 Honda Jazz. (77 HP). In normal driving conditions, 1987 Mercedes-Benz 300 should accelerate faster than 2010 Honda Jazz. With that said, vehicle weight also plays an important factor in acceleration. 1987 Mercedes-Benz 300 weights approximately 342 kg more than 2010 Honda Jazz. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1987 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1987 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2010 Honda Jazz, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Mercedes-Benz 300 (260 Nm) has 150 more torque (in Nm) than 2010 Honda Jazz. (110 Nm). This means 1987 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2010 Honda Jazz. 1987 Mercedes-Benz 300 has automatic transmission and 2010 Honda Jazz has manual transmission. 2010 Honda Jazz will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1987 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1987 Mercedes-Benz 300 2010 Honda Jazz
Make Mercedes-Benz Honda
Model 300 Jazz
Year Released 1987 2010
Engine Position Front Front
Engine Size 2962 cc 1245 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 185 HP 77 HP
Torque 260 Nm 110 Nm
Engine Bore Size 88.6 mm 73 mm
Engine Stroke Size 80.3 mm 80 mm
Acceleration 0-100mph 8.2 seconds 13.4 seconds
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1390 kg 1048 kg
Vehicle Length 4660 mm 3840 mm
Vehicle Width 1750 mm 1680 mm
Vehicle Height 1420 mm 1530 mm
Wheelbase Size 2720 mm 2460 mm
Fuel Consumption Overall 9.4 L/100km 5.5 L/100km
Fuel Tank Capacity 70 L 42 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]