1987 Peugeot 405 vs. 2003 Toyota Mark II

To start off, 2003 Toyota Mark II is newer by 16 year(s). Which means there will be less support and parts availability for 1987 Peugeot 405. In addition, the cost of maintenance, including insurance, on 1987 Peugeot 405 would be higher. At 1,988 cc (6 cylinders), 2003 Toyota Mark II is equipped with a bigger engine. In terms of performance, 2003 Toyota Mark II (156 HP @ 6200 RPM) has 46 more horse power than 1987 Peugeot 405. (110 HP @ 6000 RPM) In normal driving conditions, 2003 Toyota Mark II should accelerate faster than 1987 Peugeot 405. With that said, vehicle weight also plays an important factor in acceleration. 2003 Toyota Mark II weights approximately 550 kg more than 1987 Peugeot 405. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Toyota Mark II is four wheel drive (4WD), it will have significant more traction and grip than 1987 Peugeot 405. In wet, icy, snow, or gravel driving conditions, 2003 Toyota Mark II will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Toyota Mark II (200 Nm @ 4400 RPM) has 37 more torque (in Nm) than 1987 Peugeot 405. (163 Nm @ 3000 RPM). This means 2003 Toyota Mark II will have an easier job in driving up hills or pulling heavy equipment than 1987 Peugeot 405. 2003 Toyota Mark II has automatic transmission and 1987 Peugeot 405 has manual transmission. 1987 Peugeot 405 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Toyota Mark II will be easier to drive especially in heavy traffic.

Compare all specifications:

1987 Peugeot 405 2003 Toyota Mark II
Make Peugeot Toyota
Model 405 Mark II
Year Released 1987 2003
Engine Position Front Front
Engine Size 1905 cc 1988 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 110 HP 156 HP
Engine RPM 6000 RPM 6200 RPM
Torque 163 Nm 200 Nm
Torque RPM 3000 RPM 4400 RPM
Engine Bore Size 83 mm 75.1 mm
Engine Stroke Size 88 mm 75 mm
Drive Type Front 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1020 kg 1570 kg
Vehicle Length 4410 mm 4740 mm
Vehicle Width 1700 mm 1770 mm
Vehicle Height 1410 mm 1490 mm
Wheelbase Size 2680 mm 2800 mm