1988 Audi 200 vs. 2011 Scion iQ

To start off, 2011 Scion iQ is newer by 23 year(s). Which means there will be less support and parts availability for 1988 Audi 200. In addition, the cost of maintenance, including insurance, on 1988 Audi 200 would be higher. At 2,144 cc (5 cylinders), 1988 Audi 200 is equipped with a bigger engine. In terms of performance, 1988 Audi 200 (180 HP @ 5700 RPM) has 86 more horse power than 2011 Scion iQ. (94 HP @ 6000 RPM). In normal driving conditions, 1988 Audi 200 should accelerate faster than 2011 Scion iQ. With that said, vehicle weight also plays an important factor in acceleration. 1988 Audi 200 weights approximately 515 kg more than 2011 Scion iQ. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Audi 200 (252 Nm @ 3600 RPM) has 131 more torque (in Nm) than 2011 Scion iQ. (121 Nm @ 4400 RPM). This means 1988 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 2011 Scion iQ.

Compare all specifications:

1988 Audi 200 2011 Scion iQ
Make Audi Scion
Model 200 iQ
Year Released 1988 2011
Engine Position Front Front
Engine Size 2144 cc 1329 cc
Engine Cylinders 5 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 180 HP 94 HP
Engine RPM 5700 RPM 6000 RPM
Torque 252 Nm 121 Nm
Torque RPM 3600 RPM 4400 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual CVT
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1480 kg 965 kg
Vehicle Length 4800 mm 3051 mm
Vehicle Width 1820 mm 1680 mm
Vehicle Height 1430 mm 1500 mm
Wheelbase Size 2700 mm 2000 mm
Fuel Tank Capacity 58 L 32 L