1988 Audi Coupe vs. 2003 Avanti Studebaker
To start off, 2003 Avanti Studebaker is newer by 15 year(s). Which means there will be less support and parts availability for 1988 Audi Coupe. In addition, the cost of maintenance, including insurance, on 1988 Audi Coupe would be higher. At 6,751 cc (10 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (306 HP @ 4250 RPM) has 134 more horse power than 1988 Audi Coupe. (172 HP @ 6000 RPM) In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1988 Audi Coupe. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1455 kg more than 1988 Audi Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (425 Nm @ 3250 RPM) has 201 more torque (in Nm) than 1988 Audi Coupe. (224 Nm @ 4500 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1988 Audi Coupe. 2003 Avanti Studebaker has automatic transmission and 1988 Audi Coupe has manual transmission. 1988 Audi Coupe will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1988 Audi Coupe | 2003 Avanti Studebaker | |
| Make | Audi | Avanti |
| Model | Coupe | Studebaker |
| Year Released | 1988 | 2003 |
| Engine Position | Front | Front |
| Engine Size | 2309 cc | 6751 cc |
| Engine Cylinders | 5 cylinders | 10 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 172 HP | 306 HP |
| Engine RPM | 6000 RPM | 4250 RPM |
| Torque | 224 Nm | 425 Nm |
| Torque RPM | 4500 RPM | 3250 RPM |
| Drive Type | 4WD | 4WD |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1320 kg | 2775 kg |
| Vehicle Length | 4370 mm | 5490 mm |
| Vehicle Width | 1720 mm | 2040 mm |
| Vehicle Height | 1370 mm | 2040 mm |
| Wheelbase Size | 2560 mm | 3410 mm |
