1988 Bitter Type III vs. 1995 Mazda 626
To start off, 1995 Mazda 626 is newer by 7 year(s). Which means there will be less support and parts availability for 1988 Bitter Type III. In addition, the cost of maintenance, including insurance, on 1988 Bitter Type III would be higher. At 3,849 cc (6 cylinders), 1988 Bitter Type III is equipped with a bigger engine. In terms of performance, 1988 Bitter Type III (211 HP @ 5100 RPM) has 93 more horse power than 1995 Mazda 626. (118 HP @ 5500 RPM). In normal driving conditions, 1988 Bitter Type III should accelerate faster than 1995 Mazda 626. With that said, vehicle weight also plays an important factor in acceleration. 1988 Bitter Type III weights approximately 90 kg more than 1995 Mazda 626. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1988 Bitter Type III (320 Nm @ 3400 RPM) has 153 more torque (in Nm) than 1995 Mazda 626. (167 Nm @ 4500 RPM). This means 1988 Bitter Type III will have an easier job in driving up hills or pulling heavy equipment than 1995 Mazda 626.
Compare all specifications:
1988 Bitter Type III | 1995 Mazda 626 | |
Make | Bitter | Mazda |
Model | Type III | 626 |
Year Released | 1988 | 1995 |
Engine Position | Front | Front |
Engine Size | 3849 cc | 1996 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 211 HP | 118 HP |
Engine RPM | 5100 RPM | 5500 RPM |
Torque | 320 Nm | 167 Nm |
Torque RPM | 3400 RPM | 4500 RPM |
Engine Bore Size | 95 mm | 86 mm |
Engine Stroke Size | 90.5 mm | 86 mm |
Engine Compression Ratio | 9.5:1 | 8.6:1 |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1300 kg | 1210 kg |
Vehicle Length | 4460 mm | 4700 mm |
Vehicle Width | 1770 mm | 1760 mm |
Vehicle Height | 1400 mm | 1400 mm |
Wheelbase Size | 2390 mm | 2620 mm |
Fuel Tank Capacity | 75 L | 60 L |