1988 Bitter Type III vs. 2010 Toyota Sienna

To start off, 2010 Toyota Sienna is newer by 22 year(s). Which means there will be less support and parts availability for 1988 Bitter Type III. In addition, the cost of maintenance, including insurance, on 1988 Bitter Type III would be higher. At 3,849 cc (6 cylinders), 1988 Bitter Type III is equipped with a bigger engine. In terms of performance, 2010 Toyota Sienna (266 HP @ 6200 RPM) has 55 more horse power than 1988 Bitter Type III. (211 HP @ 5100 RPM) In normal driving conditions, 2010 Toyota Sienna should accelerate faster than 1988 Bitter Type III. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota Sienna weights approximately 635 kg more than 1988 Bitter Type III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1988 Bitter Type III is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1988 Bitter Type III. However, in wet, icy, snow, or gravel driving conditions, 2010 Toyota Sienna, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Sienna (332 Nm @ 4700 RPM) has 12 more torque (in Nm) than 1988 Bitter Type III. (320 Nm @ 3400 RPM). This means 2010 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 1988 Bitter Type III. 2010 Toyota Sienna has automatic transmission and 1988 Bitter Type III has manual transmission. 1988 Bitter Type III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Toyota Sienna will be easier to drive especially in heavy traffic.

Compare all specifications:

1988 Bitter Type III 2010 Toyota Sienna
Make Bitter Toyota
Model Type III Sienna
Year Released 1988 2010
Engine Position Front Front
Engine Size 3849 cc 3500 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 211 HP 266 HP
Engine RPM 5100 RPM 6200 RPM
Torque 320 Nm 332 Nm
Torque RPM 3400 RPM 4700 RPM
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1300 kg 1935 kg
Vehicle Length 4460 mm 5105 mm
Vehicle Width 1770 mm 1966 mm
Vehicle Height 1400 mm 1750 mm
Wheelbase Size 2390 mm 3030 mm
Fuel Tank Capacity 75 L 76 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]