1988 BMW 525 vs. 1989 Honda Integra

To start off, 1989 Honda Integra is newer by 1 year(s). Which means there will be less support and parts availability for 1988 BMW 525. In addition, the cost of maintenance, including insurance, on 1988 BMW 525 would be higher. At 2,441 cc (6 cylinders), 1988 BMW 525 is equipped with a bigger engine. In terms of performance, 1988 BMW 525 (165 HP @ 5800 RPM) has 59 more horse power than 1989 Honda Integra. (106 HP @ 6300 RPM). In normal driving conditions, 1988 BMW 525 should accelerate faster than 1989 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 1988 BMW 525 weights approximately 595 kg more than 1989 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1988 BMW 525 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1988 BMW 525. However, in wet, icy, snow, or gravel driving conditions, 1989 Honda Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 BMW 525 (239 Nm @ 4300 RPM) has 105 more torque (in Nm) than 1989 Honda Integra. (134 Nm @ 4500 RPM). This means 1988 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1989 Honda Integra. 1988 BMW 525 has automatic transmission and 1989 Honda Integra has manual transmission. 1989 Honda Integra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 BMW 525 will be easier to drive especially in heavy traffic.

Compare all specifications:

1988 BMW 525 1989 Honda Integra
Make BMW Honda
Model 525 Integra
Year Released 1988 1989
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 2441 cc 1590 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 165 HP 106 HP
Engine RPM 5800 RPM 6300 RPM
Torque 239 Nm 134 Nm
Torque RPM 4300 RPM 4500 RPM
Engine Bore Size 84 mm 81.1 mm
Engine Stroke Size 75 mm 77.4 mm
Engine Compression Ratio 8.8:1 9.0:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1605 kg 1010 kg
Vehicle Length 4730 mm 4400 mm
Vehicle Width 1760 mm 1700 mm
Vehicle Height 1420 mm 1330 mm
Wheelbase Size 2770 mm 2560 mm