1988 BMW 525 vs. 2000 Chrysler Concorde

To start off, 2000 Chrysler Concorde is newer by 12 year(s). Which means there will be less support and parts availability for 1988 BMW 525. In addition, the cost of maintenance, including insurance, on 1988 BMW 525 would be higher. At 2,736 cc (6 cylinders), 2000 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2000 Chrysler Concorde (200 HP @ 5800 RPM) has 32 more horse power than 1988 BMW 525. (168 HP @ 5800 RPM) In normal driving conditions, 2000 Chrysler Concorde should accelerate faster than 1988 BMW 525. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chrysler Concorde weights approximately 115 kg more than 1988 BMW 525. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1988 BMW 525 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1988 BMW 525. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler Concorde (258 Nm @ 4850 RPM) has 32 more torque (in Nm) than 1988 BMW 525. (226 Nm @ 4000 RPM). This means 2000 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1988 BMW 525. 2000 Chrysler Concorde has automatic transmission and 1988 BMW 525 has manual transmission. 1988 BMW 525 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler Concorde will be easier to drive especially in heavy traffic.

Compare all specifications:

1988 BMW 525 2000 Chrysler Concorde
Make BMW Chrysler
Model 525 Concorde
Year Released 1988 2000
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2443 cc 2736 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 168 HP 200 HP
Engine RPM 5800 RPM 5800 RPM
Torque 226 Nm 258 Nm
Torque RPM 4000 RPM 4850 RPM
Engine Bore Size 82.1 mm 86 mm
Engine Stroke Size 78.8 mm 78.5 mm
Engine Compression Ratio 11.0:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1460 kg 1575 kg
Vehicle Length 4730 mm 5280 mm
Vehicle Width 1760 mm 1900 mm
Vehicle Height 1420 mm 1420 mm
Wheelbase Size 2770 mm 2880 mm
Fuel Tank Capacity 70 L 68 L