1988 Buick Skylark vs. 1961 Mitsubishi A10
To start off, 1988 Buick Skylark is newer by 27 year(s). Which means there will be less support and parts availability for 1961 Mitsubishi A10. In addition, the cost of maintenance, including insurance, on 1961 Mitsubishi A10 would be higher. At 3,331 cc (6 cylinders), 1988 Buick Skylark is equipped with a bigger engine. In terms of performance, 1988 Buick Skylark (158 HP @ 5200 RPM) has 138 more horse power than 1961 Mitsubishi A10. (20 HP @ 5000 RPM). In normal driving conditions, 1988 Buick Skylark should accelerate faster than 1961 Mitsubishi A10. With that said, vehicle weight also plays an important factor in acceleration. 1988 Buick Skylark weights approximately 730 kg more than 1961 Mitsubishi A10. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1961 Mitsubishi A10 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Mitsubishi A10. However, in wet, icy, snow, or gravel driving conditions, 1988 Buick Skylark, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Buick Skylark (251 Nm @ 2000 RPM) has 217 more torque (in Nm) than 1961 Mitsubishi A10. (34 Nm @ 3800 RPM). This means 1988 Buick Skylark will have an easier job in driving up hills or pulling heavy equipment than 1961 Mitsubishi A10. 1988 Buick Skylark has automatic transmission and 1961 Mitsubishi A10 has manual transmission. 1961 Mitsubishi A10 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Buick Skylark will be easier to drive especially in heavy traffic.
Compare all specifications:
1988 Buick Skylark | 1961 Mitsubishi A10 | |
Make | Buick | Mitsubishi |
Model | Skylark | A10 |
Year Released | 1988 | 1961 |
Engine Size | 3331 cc | 493 cc |
Engine Cylinders | 6 cylinders | 2 cylinders |
Engine Type | in-line | in-line |
Horse Power | 158 HP | 20 HP |
Engine RPM | 5200 RPM | 5000 RPM |
Torque | 251 Nm | 34 Nm |
Torque RPM | 2000 RPM | 3800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1205 kg | 475 kg |
Vehicle Length | 4580 mm | 3150 mm |
Vehicle Width | 1700 mm | 1400 mm |
Vehicle Height | 1330 mm | 1390 mm |
Wheelbase Size | 2630 mm | 2070 mm |