1988 Buick Skylark vs. 1976 Holden Statesman
To start off, 1988 Buick Skylark is newer by 12 year(s). Which means there will be less support and parts availability for 1976 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1976 Holden Statesman would be higher. At 5,040 cc (8 cylinders), 1976 Holden Statesman is equipped with a bigger engine. In terms of performance, 1976 Holden Statesman (238 HP @ 4600 RPM) has 90 more horse power than 1988 Buick Skylark. (148 HP @ 5200 RPM) In normal driving conditions, 1976 Holden Statesman should accelerate faster than 1988 Buick Skylark. With that said, vehicle weight also plays an important factor in acceleration. 1976 Holden Statesman weights approximately 345 kg more than 1988 Buick Skylark. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1988 Buick Skylark, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Holden Statesman (427 Nm @ 3000 RPM) has 210 more torque (in Nm) than 1988 Buick Skylark. (217 Nm @ 4000 RPM). This means 1976 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1988 Buick Skylark. 1988 Buick Skylark has automatic transmission and 1976 Holden Statesman has manual transmission. 1976 Holden Statesman will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Buick Skylark will be easier to drive especially in heavy traffic.
Compare all specifications:
1988 Buick Skylark | 1976 Holden Statesman | |
Make | Buick | Holden |
Model | Skylark | Statesman |
Year Released | 1988 | 1976 |
Engine Position | Front | Front |
Engine Size | 2260 cc | 5040 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 148 HP | 238 HP |
Engine RPM | 5200 RPM | 4600 RPM |
Torque | 217 Nm | 427 Nm |
Torque RPM | 4000 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1190 kg | 1535 kg |
Vehicle Length | 4580 mm | 5190 mm |
Vehicle Width | 1700 mm | 1890 mm |
Vehicle Height | 1330 mm | 1380 mm |
Wheelbase Size | 2630 mm | 2900 mm |