1988 Chevrolet Blazer vs. 2000 Mercedes-Benz C

To start off, 2000 Mercedes-Benz C is newer by 12 year(s). Which means there will be less support and parts availability for 1988 Chevrolet Blazer. In addition, the cost of maintenance, including insurance, on 1988 Chevrolet Blazer would be higher. At 5,010 cc (8 cylinders), 1988 Chevrolet Blazer is equipped with a bigger engine. In terms of performance, 1988 Chevrolet Blazer (208 HP @ 4000 RPM) has 47 more horse power than 2000 Mercedes-Benz C. (161 HP @ 5300 RPM). In normal driving conditions, 1988 Chevrolet Blazer should accelerate faster than 2000 Mercedes-Benz C. With that said, vehicle weight also plays an important factor in acceleration. 1988 Chevrolet Blazer weights approximately 344 kg more than 2000 Mercedes-Benz C. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1988 Chevrolet Blazer is four wheel drive (4WD), it will have significant more traction and grip than 2000 Mercedes-Benz C. In wet, icy, snow, or gravel driving conditions, 1988 Chevrolet Blazer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Chevrolet Blazer (407 Nm @ 2800 RPM) has 177 more torque (in Nm) than 2000 Mercedes-Benz C. (230 Nm @ 2500 RPM). This means 1988 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 2000 Mercedes-Benz C. 1988 Chevrolet Blazer has automatic transmission and 2000 Mercedes-Benz C has manual transmission. 2000 Mercedes-Benz C will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Chevrolet Blazer will be easier to drive especially in heavy traffic.

Compare all specifications:

1988 Chevrolet Blazer 2000 Mercedes-Benz C
Make Chevrolet Mercedes-Benz
Model Blazer C
Year Released 1988 2000
Body Type SUV Station Wagon
Engine Position Front Front
Engine Size 5010 cc 1996 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 208 HP 161 HP
Engine RPM 4000 RPM 5300 RPM
Torque 407 Nm 230 Nm
Torque RPM 2800 RPM 2500 RPM
Engine Bore Size 98.4 mm 89.9 mm
Engine Stroke Size 82.5 mm 78.7 mm
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 1884 kg 1540 kg
Vehicle Length 4670 mm 4550 mm
Vehicle Width 2050 mm 1730 mm
Vehicle Height 1870 mm 1470 mm
Wheelbase Size 2710 mm 2720 mm