1988 Chrysler Conquest vs. 2008 Isuzu I-290
To start off, 2008 Isuzu I-290 is newer by 20 year(s). Which means there will be less support and parts availability for 1988 Chrysler Conquest. In addition, the cost of maintenance, including insurance, on 1988 Chrysler Conquest would be higher. At 2,901 cc (4 cylinders), 2008 Isuzu I-290 is equipped with a bigger engine. In terms of performance, both vehicles can yield 185 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Because 2008 Isuzu I-290 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Isuzu I-290. However, in wet, icy, snow, or gravel driving conditions, 1988 Chrysler Conquest, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Chrysler Conquest (318 Nm @ 2500 RPM) has 60 more torque (in Nm) than 2008 Isuzu I-290. (258 Nm @ 2800 RPM). This means 1988 Chrysler Conquest will have an easier job in driving up hills or pulling heavy equipment than 2008 Isuzu I-290.
Compare all specifications:
| 1988 Chrysler Conquest | 2008 Isuzu I-290 | |
| Make | Chrysler | Isuzu |
| Model | Conquest | I-290 |
| Year Released | 1988 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2555 cc | 2901 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 185 HP | 185 HP |
| Engine RPM | 5000 RPM | 5600 RPM |
| Torque | 318 Nm | 258 Nm |
| Torque RPM | 2500 RPM | 2800 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Vehicle Length | 4410 mm | 5270 mm |
| Vehicle Width | 1690 mm | 1720 mm |
| Vehicle Height | 1280 mm | 1650 mm |
| Wheelbase Size | 2450 mm | 3210 mm |
