1988 Chrysler New Yorker vs. 2006 Honda CR-V

To start off, 2006 Honda CR-V is newer by 18 year(s). Which means there will be less support and parts availability for 1988 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1988 Chrysler New Yorker would be higher. At 2,971 cc (6 cylinders), 1988 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 2006 Honda CR-V (156 HP @ 5500 RPM) has 22 more horse power than 1988 Chrysler New Yorker. (134 HP @ 4800 RPM) In normal driving conditions, 2006 Honda CR-V should accelerate faster than 1988 Chrysler New Yorker. With that said, vehicle weight also plays an important factor in acceleration. 2006 Honda CR-V weights approximately 570 kg more than 1988 Chrysler New Yorker. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Chrysler New Yorker (228 Nm @ 2800 RPM) has 11 more torque (in Nm) than 2006 Honda CR-V. (217 Nm @ 4500 RPM). This means 1988 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 2006 Honda CR-V.

Compare all specifications:

1988 Chrysler New Yorker 2006 Honda CR-V
Make Chrysler Honda
Model New Yorker CR-V
Year Released 1988 2006
Engine Position Front Front
Engine Size 2971 cc 2354 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 134 HP 156 HP
Engine RPM 4800 RPM 5500 RPM
Torque 228 Nm 217 Nm
Torque RPM 2800 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Number of Seats 5 seats 5 seats
Vehicle Weight 1420 kg 1990 kg
Vehicle Length 4920 mm 4600 mm
Vehicle Width 1750 mm 1790 mm
Vehicle Height 1370 mm 1690 mm
Wheelbase Size 2660 mm 2630 mm