1988 Donkervoort S8 vs. 2011 Ford F-250

To start off, 2011 Ford F-250 is newer by 23 year(s). Which means there will be less support and parts availability for 1988 Donkervoort S8. In addition, the cost of maintenance, including insurance, on 1988 Donkervoort S8 would be higher. At 6,200 cc (8 cylinders), 2011 Ford F-250 is equipped with a bigger engine. In terms of performance, 2011 Ford F-250 (385 HP @ 5500 RPM) has 270 more horse power than 1988 Donkervoort S8. (115 HP @ 5500 RPM) In normal driving conditions, 2011 Ford F-250 should accelerate faster than 1988 Donkervoort S8.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ford F-250 (548 Nm @ 4500 RPM) has 382 more torque (in Nm) than 1988 Donkervoort S8. (166 Nm @ 4000 RPM). This means 2011 Ford F-250 will have an easier job in driving up hills or pulling heavy equipment than 1988 Donkervoort S8. 2011 Ford F-250 has automatic transmission and 1988 Donkervoort S8 has manual transmission. 1988 Donkervoort S8 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Ford F-250 will be easier to drive especially in heavy traffic.

Compare all specifications:

1988 Donkervoort S8 2011 Ford F-250
Make Donkervoort Ford
Model S8 F-250
Year Released 1988 2011
Engine Position Front Front
Engine Size 1993 cc 6200 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 115 HP 385 HP
Engine RPM 5500 RPM 5500 RPM
Torque 166 Nm 548 Nm
Torque RPM 4000 RPM 4500 RPM
Fuel Type Gasoline Flex Fuel
Drive Type Rear Rear
Transmission Type Manual Automatic
Vehicle Length 3610 mm 6269 mm
Vehicle Width 1740 mm 2029 mm
Vehicle Height 1110 mm 1966 mm