1988 Fiat Tipo vs. 1965 Ginetta G10
To start off, 1988 Fiat Tipo is newer by 23 year(s). Which means there will be less support and parts availability for 1965 Ginetta G10. In addition, the cost of maintenance, including insurance, on 1965 Ginetta G10 would be higher. At 4,726 cc (8 cylinders), 1965 Ginetta G10 is equipped with a bigger engine. In terms of performance, 1965 Ginetta G10 (290 HP @ 5000 RPM) has 152 more horse power than 1988 Fiat Tipo. (138 HP @ 6250 RPM) In normal driving conditions, 1965 Ginetta G10 should accelerate faster than 1988 Fiat Tipo. With that said, vehicle weight also plays an important factor in acceleration. 1988 Fiat Tipo weights approximately 160 kg more than 1965 Ginetta G10.
Because 1965 Ginetta G10 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Ginetta G10. However, in wet, icy, snow, or gravel driving conditions, 1988 Fiat Tipo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1988 Fiat Tipo | 1965 Ginetta G10 | |
Make | Fiat | Ginetta |
Model | Tipo | G10 |
Year Released | 1988 | 1965 |
Engine Position | Front | Middle |
Engine Size | 1756 cc | 4726 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 138 HP | 290 HP |
Engine RPM | 6250 RPM | 5000 RPM |
Engine Bore Size | 84.1 mm | 101.6 mm |
Engine Stroke Size | 79.2 mm | 72.9 mm |
Engine Compression Ratio | 9.5:1 | 10.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Vehicle Weight | 1100 kg | 940 kg |
Vehicle Length | 3960 mm | 3990 mm |
Vehicle Width | 1710 mm | 1510 mm |
Vehicle Height | 1450 mm | 1280 mm |
Wheelbase Size | 2550 mm | 2290 mm |