1988 Fiat Tipo vs. 1972 Humber Sceptre
To start off, 1988 Fiat Tipo is newer by 16 year(s). Which means there will be less support and parts availability for 1972 Humber Sceptre. In addition, the cost of maintenance, including insurance, on 1972 Humber Sceptre would be higher. At 1,725 cc (4 cylinders), 1972 Humber Sceptre is equipped with a bigger engine. In terms of performance, 1988 Fiat Tipo (83 HP @ 6000 RPM) has 1 more horse power than 1972 Humber Sceptre. (82 HP @ 5200 RPM). In normal driving conditions, 1988 Fiat Tipo should accelerate faster than 1972 Humber Sceptre. With that said, vehicle weight also plays an important factor in acceleration. 1988 Fiat Tipo weights approximately 58 kg more than 1972 Humber Sceptre. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Humber Sceptre is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Humber Sceptre. However, in wet, icy, snow, or gravel driving conditions, 1988 Fiat Tipo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Fiat Tipo (130 Nm @ 2900 RPM) has 7 more torque (in Nm) than 1972 Humber Sceptre. (123 Nm @ 3600 RPM). This means 1988 Fiat Tipo will have an easier job in driving up hills or pulling heavy equipment than 1972 Humber Sceptre.
Compare all specifications:
| 1988 Fiat Tipo | 1972 Humber Sceptre | |
| Make | Fiat | Humber |
| Model | Tipo | Sceptre |
| Year Released | 1988 | 1972 |
| Engine Position | Front | Front |
| Engine Size | 1581 cc | 1725 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 83 HP | 82 HP |
| Engine RPM | 6000 RPM | 5200 RPM |
| Torque | 130 Nm | 123 Nm |
| Torque RPM | 2900 RPM | 3600 RPM |
| Engine Bore Size | 86.4 mm | 81.5 mm |
| Engine Stroke Size | 67.5 mm | 82.6 mm |
| Engine Compression Ratio | 9.2:1 | 9.2:1 |
| Drive Type | Front | Rear |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1050 kg | 992 kg |
| Vehicle Length | 3960 mm | 4320 mm |
| Vehicle Width | 1710 mm | 1620 mm |
| Vehicle Height | 1450 mm | 1430 mm |
| Wheelbase Size | 2550 mm | 2510 mm |
