1988 Fiat Tipo vs. 1973 Mercedes-Benz 280
To start off, 1988 Fiat Tipo is newer by 15 year(s). Which means there will be less support and parts availability for 1973 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1973 Mercedes-Benz 280 would be higher. At 2,778 cc (6 cylinders), 1973 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 1973 Mercedes-Benz 280 (160 HP @ 5500 RPM) has 45 more horse power than 1988 Fiat Tipo. (115 HP @ 5750 RPM) In normal driving conditions, 1973 Mercedes-Benz 280 should accelerate faster than 1988 Fiat Tipo. With that said, vehicle weight also plays an important factor in acceleration. 1973 Mercedes-Benz 280 weights approximately 320 kg more than 1988 Fiat Tipo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1973 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 1988 Fiat Tipo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Mercedes-Benz 280 (224 Nm @ 3600 RPM) has 68 more torque (in Nm) than 1988 Fiat Tipo. (156 Nm @ 3300 RPM). This means 1973 Mercedes-Benz 280 will have an easier job in driving up hills or pulling heavy equipment than 1988 Fiat Tipo. 1988 Fiat Tipo has automatic transmission and 1973 Mercedes-Benz 280 has manual transmission. 1973 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Fiat Tipo will be easier to drive especially in heavy traffic.
Compare all specifications:
1988 Fiat Tipo | 1973 Mercedes-Benz 280 | |
Make | Fiat | Mercedes-Benz |
Model | Tipo | 280 |
Year Released | 1988 | 1973 |
Engine Position | Front | Front |
Engine Size | 1995 cc | 2778 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 115 HP | 160 HP |
Engine RPM | 5750 RPM | 5500 RPM |
Torque | 156 Nm | 224 Nm |
Torque RPM | 3300 RPM | 3600 RPM |
Engine Bore Size | 84 mm | 86.5 mm |
Engine Stroke Size | 90 mm | 78.8 mm |
Engine Compression Ratio | 9.5:1 | 9.5:1 |
Top Speed | 180 km/hour | 190 km/hour |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1180 kg | 1500 kg |
Vehicle Length | 3960 mm | 4910 mm |
Vehicle Width | 1710 mm | 1820 mm |
Vehicle Height | 1450 mm | 1450 mm |
Wheelbase Size | 2550 mm | 2760 mm |