1988 Ford Meteor vs. 1967 Honda S800
To start off, 1988 Ford Meteor is newer by 21 year(s). Which means there will be less support and parts availability for 1967 Honda S800. In addition, the cost of maintenance, including insurance, on 1967 Honda S800 would be higher. At 1,597 cc (4 cylinders), 1988 Ford Meteor is equipped with a bigger engine. In terms of performance, 1988 Ford Meteor (71 HP @ 5000 RPM) has 4 more horse power than 1967 Honda S800. (67 HP @ 8000 RPM). In normal driving conditions, 1988 Ford Meteor should accelerate faster than 1967 Honda S800.
Because 1967 Honda S800 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Honda S800. However, in wet, icy, snow, or gravel driving conditions, 1988 Ford Meteor, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Ford Meteor (121 Nm @ 3000 RPM) has 55 more torque (in Nm) than 1967 Honda S800. (66 Nm @ 6000 RPM). This means 1988 Ford Meteor will have an easier job in driving up hills or pulling heavy equipment than 1967 Honda S800.
Compare all specifications:
1988 Ford Meteor | 1967 Honda S800 | |
Make | Ford | Honda |
Model | Meteor | S800 |
Year Released | 1988 | 1967 |
Body Type | Sedan | Convertible |
Engine Position | Front | Front |
Engine Size | 1597 cc | 791 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 71 HP | 67 HP |
Engine RPM | 5000 RPM | 8000 RPM |
Torque | 121 Nm | 66 Nm |
Torque RPM | 3000 RPM | 6000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4200 mm | 3350 mm |
Vehicle Width | 1650 mm | 1410 mm |
Vehicle Height | 1400 mm | 1230 mm |
Wheelbase Size | 2410 mm | 2010 mm |