1988 Ford RS 200 vs. 1996 GAZ 3110
To start off, 1996 GAZ 3110 is newer by 8 year(s). Which means there will be less support and parts availability for 1988 Ford RS 200. In addition, the cost of maintenance, including insurance, on 1988 Ford RS 200 would be higher. At 2,133 cc (4 cylinders), 1996 GAZ 3110 is equipped with a bigger engine. In terms of performance, 1988 Ford RS 200 (247 HP @ 6500 RPM) has 135 more horse power than 1996 GAZ 3110. (112 HP @ 4300 RPM). In normal driving conditions, 1988 Ford RS 200 should accelerate faster than 1996 GAZ 3110. With that said, vehicle weight also plays an important factor in acceleration. 1996 GAZ 3110 weights approximately 120 kg more than 1988 Ford RS 200.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Ford RS 200 (292 Nm @ 4500 RPM) has 32 more torque (in Nm) than 1996 GAZ 3110. (260 Nm @ 1800 RPM). This means 1988 Ford RS 200 will have an easier job in driving up hills or pulling heavy equipment than 1996 GAZ 3110.
Compare all specifications:
1988 Ford RS 200 | 1996 GAZ 3110 | |
Make | Ford | GAZ |
Model | RS 200 | 3110 |
Year Released | 1988 | 1996 |
Engine Position | Middle | Front |
Engine Size | 1804 cc | 2133 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 247 HP | 112 HP |
Engine RPM | 6500 RPM | 4300 RPM |
Torque | 292 Nm | 260 Nm |
Torque RPM | 4500 RPM | 1800 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1280 kg | 1400 kg |
Vehicle Length | 4010 mm | 4880 mm |
Vehicle Width | 1770 mm | 1810 mm |
Vehicle Height | 1330 mm | 1490 mm |
Wheelbase Size | 2410 mm | 2810 mm |