1988 Ford RS 200 vs. 2010 Mazda RX-8

To start off, 2010 Mazda RX-8 is newer by 22 year(s). Which means there will be less support and parts availability for 1988 Ford RS 200. In addition, the cost of maintenance, including insurance, on 1988 Ford RS 200 would be higher. At 1,804 cc (4 cylinders), 1988 Ford RS 200 is equipped with a bigger engine. In terms of performance, 1988 Ford RS 200 (247 HP @ 6500 RPM) has 15 more horse power than 2010 Mazda RX-8. (232 HP @ 8500 RPM). In normal driving conditions, 1988 Ford RS 200 should accelerate faster than 2010 Mazda RX-8. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda RX-8 weights approximately 110 kg more than 1988 Ford RS 200.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Ford RS 200 (292 Nm @ 4500 RPM) has 77 more torque (in Nm) than 2010 Mazda RX-8. (215 Nm @ 5500 RPM). This means 1988 Ford RS 200 will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda RX-8.

Compare all specifications:

1988 Ford RS 200 2010 Mazda RX-8
Make Ford Mazda
Model RS 200 RX-8
Year Released 1988 2010
Body Type Coupe Coupe
Engine Position Middle Front
Engine Size 1804 cc 1300 cc
Engine Type in-line dual-disk rotary
Horse Power 247 HP 232 HP
Engine RPM 6500 RPM 8500 RPM
Torque 292 Nm 215 Nm
Torque RPM 4500 RPM 5500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1280 kg 1390 kg
Vehicle Length 4010 mm 4460 mm
Vehicle Width 1770 mm 1770 mm
Vehicle Height 1330 mm 1341 mm
Wheelbase Size 2410 mm 2700 mm
Fuel Tank Capacity 116 L 64 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]