1988 Holden Barina vs. 2005 Mitsubishi Lancer
To start off, 2005 Mitsubishi Lancer is newer by 17 year(s). Which means there will be less support and parts availability for 1988 Holden Barina. In addition, the cost of maintenance, including insurance, on 1988 Holden Barina would be higher. At 1,582 cc (4 cylinders), 2005 Mitsubishi Lancer is equipped with a bigger engine. In terms of performance, 2005 Mitsubishi Lancer (113 HP @ 4000 RPM) has 46 more horse power than 1988 Holden Barina. (67 HP @ 5300 RPM) In normal driving conditions, 2005 Mitsubishi Lancer should accelerate faster than 1988 Holden Barina. With that said, vehicle weight also plays an important factor in acceleration. 2005 Mitsubishi Lancer weights approximately 440 kg more than 1988 Holden Barina. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Mitsubishi Lancer (138 Nm @ 4500 RPM) has 34 more torque (in Nm) than 1988 Holden Barina. (104 Nm @ 3700 RPM). This means 2005 Mitsubishi Lancer will have an easier job in driving up hills or pulling heavy equipment than 1988 Holden Barina.
Compare all specifications:
1988 Holden Barina | 2005 Mitsubishi Lancer | |
Make | Holden | Mitsubishi |
Model | Barina | Lancer |
Year Released | 1988 | 2005 |
Body Type | Hatchback | Sedan |
Engine Position | Front | Front |
Engine Size | 1324 cc | 1582 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 67 HP | 113 HP |
Engine RPM | 5300 RPM | 4000 RPM |
Torque | 104 Nm | 138 Nm |
Torque RPM | 3700 RPM | 4500 RPM |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 730 kg | 1170 kg |
Wheelbase Size | 2250 mm | 2630 mm |