1988 Holden Barina vs. 2012 BMW 330
To start off, 2012 BMW 330 is newer by 24 year(s). Which means there will be less support and parts availability for 1988 Holden Barina. In addition, the cost of maintenance, including insurance, on 1988 Holden Barina would be higher. At 2,993 cc (6 cylinders), 2012 BMW 330 is equipped with a bigger engine. In terms of performance, 2012 BMW 330 (256 HP @ 4000 RPM) has 189 more horse power than 1988 Holden Barina. (67 HP @ 5300 RPM) In normal driving conditions, 2012 BMW 330 should accelerate faster than 1988 Holden Barina.
Because 2012 BMW 330 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 BMW 330. However, in wet, icy, snow, or gravel driving conditions, 1988 Holden Barina, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 BMW 330 (540 Nm @ 3000 RPM) has 436 more torque (in Nm) than 1988 Holden Barina. (104 Nm @ 3700 RPM). This means 2012 BMW 330 will have an easier job in driving up hills or pulling heavy equipment than 1988 Holden Barina.
Compare all specifications:
| 1988 Holden Barina | 2012 BMW 330 | |
| Make | Holden | BMW |
| Model | Barina | 330 |
| Year Released | 1988 | 2012 |
| Body Type | Hatchback | Coupe |
| Engine Position | Front | Front |
| Engine Size | 1324 cc | 2993 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 67 HP | 256 HP |
| Engine RPM | 5300 RPM | 4000 RPM |
| Torque | 104 Nm | 540 Nm |
| Torque RPM | 3700 RPM | 3000 RPM |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Front | Rear |
| Transmission Type | Manual | 6-speed manual |
| Vehicle Length | 3780 mm | 4624 mm |
| Vehicle Width | 1550 mm | 1811 mm |
| Vehicle Height | 1360 mm | 1384 mm |
| Wheelbase Size | 2250 mm | 2810 mm |
