1988 Holden Commodore vs. 2013 Fiat 500

To start off, 2013 Fiat 500 is newer by 25 year(s). Which means there will be less support and parts availability for 1988 Holden Commodore. In addition, the cost of maintenance, including insurance, on 1988 Holden Commodore would be higher. At 2,961 cc (6 cylinders), 1988 Holden Commodore is equipped with a bigger engine. In terms of performance, 1988 Holden Commodore (153 HP @ 5200 RPM) has 52 more horse power than 2013 Fiat 500. (101 HP @ 6500 RPM). In normal driving conditions, 1988 Holden Commodore should accelerate faster than 2013 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1988 Holden Commodore weights approximately 143 kg more than 2013 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1988 Holden Commodore is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1988 Holden Commodore. However, in wet, icy, snow, or gravel driving conditions, 2013 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Holden Commodore (247 Nm @ 3600 RPM) has 114 more torque (in Nm) than 2013 Fiat 500. (133 Nm @ 4000 RPM). This means 1988 Holden Commodore will have an easier job in driving up hills or pulling heavy equipment than 2013 Fiat 500. 1988 Holden Commodore has automatic transmission and 2013 Fiat 500 has manual transmission. 2013 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Holden Commodore will be easier to drive especially in heavy traffic.

Compare all specifications:

1988 Holden Commodore 2013 Fiat 500
Make Holden Fiat
Model Commodore 500
Year Released 1988 2013
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 2961 cc 1368 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 153 HP 101 HP
Engine RPM 5200 RPM 6500 RPM
Torque 247 Nm 133 Nm
Torque RPM 3600 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic 5-speed manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1215 kg 1072 kg
Vehicle Length 4770 mm 3546 mm
Vehicle Width 1730 mm 1628 mm
Vehicle Height 1380 mm 1519 mm
Wheelbase Size 2670 mm 2301 mm