1988 Honda Prelude vs. 2007 Lancia Lybra
To start off, 2007 Lancia Lybra is newer by 19 year(s). Which means there will be less support and parts availability for 1988 Honda Prelude. In addition, the cost of maintenance, including insurance, on 1988 Honda Prelude would be higher. At 2,387 cc (5 cylinders), 2007 Lancia Lybra is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2007 Lancia Lybra weights approximately 275 kg more than 1988 Honda Prelude.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Lancia Lybra (305 Nm @ 1800 RPM) has 121 more torque (in Nm) than 1988 Honda Prelude. (184 Nm @ 5500 RPM). This means 2007 Lancia Lybra will have an easier job in driving up hills or pulling heavy equipment than 1988 Honda Prelude.
Compare all specifications:
1988 Honda Prelude | 2007 Lancia Lybra | |
Make | Honda | Lancia |
Model | Prelude | Lybra |
Year Released | 1988 | 2007 |
Engine Position | Front | Front |
Engine Size | 1958 cc | 2387 cc |
Engine Cylinders | 4 cylinders | 5 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 148 HP | 148 HP |
Engine RPM | 6000 RPM | 4000 RPM |
Torque | 184 Nm | 305 Nm |
Torque RPM | 5500 RPM | 1800 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1170 kg | 1445 kg |
Vehicle Length | 4470 mm | 4470 mm |
Vehicle Width | 1700 mm | 1750 mm |
Vehicle Height | 1300 mm | 1470 mm |
Wheelbase Size | 2580 mm | 2600 mm |