1988 Toyota Lexcen vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 25 year(s). Which means there will be less support and parts availability for 1988 Toyota Lexcen. In addition, the cost of maintenance, including insurance, on 1988 Toyota Lexcen would be higher. At 3,791 cc (6 cylinders), 1988 Toyota Lexcen is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (279 HP @ 6400 RPM) has 108 more horse power than 1988 Toyota Lexcen. (171 HP @ 4800 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1988 Toyota Lexcen. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 484 kg more than 1988 Toyota Lexcen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1988 Toyota Lexcen is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1988 Toyota Lexcen. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 60 more torque (in Nm) than 1988 Toyota Lexcen. (293 Nm @ 3600 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1988 Toyota Lexcen. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1988 Toyota Lexcen has manual transmission. 1988 Toyota Lexcen will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1988 Toyota Lexcen | 2013 Chrysler 200 CONVERTIBLE | |
| Make | Toyota | Chrysler |
| Model | Lexcen | 200 CONVERTIBLE |
| Year Released | 1988 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 3791 cc | 3600 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 171 HP | 279 HP |
| Engine RPM | 4800 RPM | 6400 RPM |
| Torque | 293 Nm | 353 Nm |
| Torque RPM | 3600 RPM | 4400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Vehicle Weight | 1330 kg | 1814 kg |
| Vehicle Length | 4900 mm | 4947 mm |
| Vehicle Width | 1820 mm | 2089 mm |
| Vehicle Height | 1410 mm | 1470 mm |
| Wheelbase Size | 2740 mm | 2765 mm |
