1989 Alpina B 10 vs. 2010 Holden Captiva

To start off, 2010 Holden Captiva is newer by 21 year(s). Which means there will be less support and parts availability for 1989 Alpina B 10. In addition, the cost of maintenance, including insurance, on 1989 Alpina B 10 would be higher. At 3,500 cc (6 cylinders), 1989 Alpina B 10 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2010 Holden Captiva weights approximately 600 kg more than 1989 Alpina B 10.

Because 2010 Holden Captiva is four wheel drive (4WD), it will have significant more traction and grip than 1989 Alpina B 10. In wet, icy, snow, or gravel driving conditions, 2010 Holden Captiva will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Alpina B 10 (705 Nm) has 385 more torque (in Nm) than 2010 Holden Captiva. (320 Nm). This means 1989 Alpina B 10 will have an easier job in driving up hills or pulling heavy equipment than 2010 Holden Captiva. 2010 Holden Captiva has automatic transmission and 1989 Alpina B 10 has manual transmission. 1989 Alpina B 10 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Holden Captiva will be easier to drive especially in heavy traffic.

Compare all specifications:

1989 Alpina B 10 2010 Holden Captiva
Make Alpina Holden
Model B 10 Captiva
Year Released 1989 2010
Body Type Sedan SUV
Engine Position Front Front
Engine Size 3500 cc 1990 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 0 HP 148 HP
Engine RPM 4800 RPM 4000 RPM
Torque 705 Nm 320 Nm
Top Speed 291 km/hour 180 km/hour
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1255 kg 1855 kg
Wheelbase Size 2690 mm 2710 mm
Fuel Tank Capacity 70 L 65 L