1989 Audi 100 vs. 1993 Beijing BJ 212
To start off, 1993 Beijing BJ 212 is newer by 4 year(s). Which means there will be less support and parts availability for 1989 Audi 100. In addition, the cost of maintenance, including insurance, on 1989 Audi 100 would be higher. At 2,226 cc (5 cylinders), 1989 Audi 100 is equipped with a bigger engine. In terms of performance, 1989 Audi 100 (163 HP @ 5500 RPM) has 76 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM). In normal driving conditions, 1989 Audi 100 should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 230 kg more than 1989 Audi 100.
Because 1993 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1989 Audi 100. In wet, icy, snow, or gravel driving conditions, 1993 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Audi 100 (235 Nm @ 3000 RPM) has 54 more torque (in Nm) than 1993 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1989 Audi 100 will have an easier job in driving up hills or pulling heavy equipment than 1993 Beijing BJ 212.
Compare all specifications:
1989 Audi 100 | 1993 Beijing BJ 212 | |
Make | Audi | Beijing |
Model | 100 | BJ 212 |
Year Released | 1989 | 1993 |
Engine Size | 2226 cc | 2068 cc |
Engine Cylinders | 5 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 163 HP | 87 HP |
Engine RPM | 5500 RPM | 4250 RPM |
Torque | 235 Nm | 181 Nm |
Torque RPM | 3000 RPM | 2000 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1300 kg | 1530 kg |
Vehicle Length | 4800 mm | 3910 mm |
Vehicle Width | 1820 mm | 1760 mm |
Vehicle Height | 1430 mm | 1880 mm |
Wheelbase Size | 2700 mm | 2310 mm |