1989 Audi 100 vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 19 year(s). Which means there will be less support and parts availability for 1989 Audi 100. In addition, the cost of maintenance, including insurance, on 1989 Audi 100 would be higher. At 2,460 cc (5 cylinders), 1989 Audi 100 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1989 Audi 100 weights approximately 360 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Audi 100 (266 Nm @ 2250 RPM) has 156 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1989 Audi 100 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
1989 Audi 100 | 2008 Ford Bantam | |
Make | Audi | Ford |
Model | 100 | Bantam |
Year Released | 1989 | 2008 |
Engine Position | Front | Front |
Engine Size | 2460 cc | 1297 cc |
Engine Cylinders | 5 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 118 HP | 0 HP |
Torque | 266 Nm | 110 Nm |
Torque RPM | 2250 RPM | 3000 RPM |
Engine Bore Size | 81 mm | 74 mm |
Engine Stroke Size | 95.5 mm | 75.5 mm |
Fuel Type | Diesel | Gasoline |
Top Speed | 200 km/hour | 158 km/hour |
Acceleration 0-100mph | 9.9 seconds | 12.9 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1320 kg | 960 kg |
Vehicle Length | 4800 mm | 4280 mm |
Vehicle Width | 1820 mm | 1470 mm |
Vehicle Height | 1430 mm | 1640 mm |
Wheelbase Size | 2700 mm | 2670 mm |
Fuel Tank Capacity | 60 L | 54 L |