1989 Fiat Uno vs. 1989 Mercedes-Benz 300

To start off, both 1989 Fiat Uno and 1989 Mercedes-Benz 300 were released in the same year (1989). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,962 cc (6 cylinders), 1989 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1989 Mercedes-Benz 300 (231 HP @ 6300 RPM) has 113 more horse power than 1989 Fiat Uno. (118 HP @ 6000 RPM) In normal driving conditions, 1989 Mercedes-Benz 300 should accelerate faster than 1989 Fiat Uno. With that said, vehicle weight also plays an important factor in acceleration. 1989 Mercedes-Benz 300 weights approximately 560 kg more than 1989 Fiat Uno. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1989 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1989 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 1989 Fiat Uno, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Mercedes-Benz 300 (273 Nm @ 4600 RPM) has 112 more torque (in Nm) than 1989 Fiat Uno. (161 Nm @ 3500 RPM). This means 1989 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 1989 Fiat Uno. 1989 Mercedes-Benz 300 has automatic transmission and 1989 Fiat Uno has manual transmission. 1989 Fiat Uno will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1989 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1989 Fiat Uno 1989 Mercedes-Benz 300
Make Fiat Mercedes-Benz
Model Uno 300
Year Released 1989 1989
Engine Position Front Front
Engine Size 1372 cc 2962 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 118 HP 231 HP
Engine RPM 6000 RPM 6300 RPM
Torque 161 Nm 273 Nm
Torque RPM 3500 RPM 4600 RPM
Engine Bore Size 80.5 mm 88.6 mm
Engine Stroke Size 67.4 mm 80.3 mm
Engine Compression Ratio 7.9:1 10.0:1
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 930 kg 1490 kg
Vehicle Length 3700 mm 4750 mm
Vehicle Width 1570 mm 1750 mm
Vehicle Height 1410 mm 1450 mm
Wheelbase Size 2370 mm 2810 mm