1989 Fiat Uno vs. 2005 Nissan Almera

To start off, 2005 Nissan Almera is newer by 16 year(s). Which means there will be less support and parts availability for 1989 Fiat Uno. In addition, the cost of maintenance, including insurance, on 1989 Fiat Uno would be higher. At 1,769 cc (4 cylinders), 2005 Nissan Almera is equipped with a bigger engine. In terms of performance, 2005 Nissan Almera (114 HP @ 5600 RPM) has 69 more horse power than 1989 Fiat Uno. (45 HP @ 5250 RPM) In normal driving conditions, 2005 Nissan Almera should accelerate faster than 1989 Fiat Uno. With that said, vehicle weight also plays an important factor in acceleration. 2005 Nissan Almera weights approximately 483 kg more than 1989 Fiat Uno. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Nissan Almera (163 Nm) has 78 more torque (in Nm) than 1989 Fiat Uno. (85 Nm). This means 2005 Nissan Almera will have an easier job in driving up hills or pulling heavy equipment than 1989 Fiat Uno.

Compare all specifications:

1989 Fiat Uno 2005 Nissan Almera
Make Fiat Nissan
Model Uno Almera
Year Released 1989 2005
Body Type Hatchback Hatchback
Engine Position Front Front
Engine Size 999 cc 1769 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 45 HP 114 HP
Engine RPM 5250 RPM 5600 RPM
Torque 85 Nm 163 Nm
Engine Bore Size 70 mm 80.1 mm
Engine Stroke Size 64.9 mm 88 mm
Acceleration 0-100mph 17.7 seconds 10.8 seconds
Drive Type Front Front
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 3 doors
Vehicle Weight 770 kg 1253 kg
Vehicle Length 3700 mm 4200 mm
Vehicle Width 1570 mm 1710 mm
Vehicle Height 1410 mm 1450 mm
Wheelbase Size 2370 mm 2710 mm