1989 Holden Camira vs. 1970 Honda N III
To start off, 1989 Holden Camira is newer by 19 year(s). Which means there will be less support and parts availability for 1970 Honda N III. In addition, the cost of maintenance, including insurance, on 1970 Honda N III would be higher. At 1,998 cc (4 cylinders), 1989 Holden Camira is equipped with a bigger engine. In terms of performance, 1989 Holden Camira (114 HP @ 5200 RPM) has 78 more horse power than 1970 Honda N III. (36 HP @ 9000 RPM). In normal driving conditions, 1989 Holden Camira should accelerate faster than 1970 Honda N III. With that said, vehicle weight also plays an important factor in acceleration. 1989 Holden Camira weights approximately 510 kg more than 1970 Honda N III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Holden Camira (176 Nm @ 3200 RPM) has 144 more torque (in Nm) than 1970 Honda N III. (32 Nm @ 7000 RPM). This means 1989 Holden Camira will have an easier job in driving up hills or pulling heavy equipment than 1970 Honda N III.
Compare all specifications:
1989 Holden Camira | 1970 Honda N III | |
Make | Holden | Honda |
Model | Camira | N III |
Year Released | 1989 | 1970 |
Engine Position | Front | Front |
Engine Size | 1998 cc | 354 cc |
Engine Cylinders | 4 cylinders | 2 cylinders |
Engine Type | in-line | in-line |
Horse Power | 114 HP | 36 HP |
Engine RPM | 5200 RPM | 9000 RPM |
Torque | 176 Nm | 32 Nm |
Torque RPM | 3200 RPM | 7000 RPM |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1050 kg | 540 kg |
Vehicle Length | 4410 mm | 3000 mm |
Vehicle Width | 1680 mm | 1300 mm |
Vehicle Height | 1360 mm | 1350 mm |
Wheelbase Size | 2580 mm | 2010 mm |