1989 Holden Camira vs. 2001 Honda Fit
To start off, 2001 Honda Fit is newer by 12 year(s). Which means there will be less support and parts availability for 1989 Holden Camira. In addition, the cost of maintenance, including insurance, on 1989 Holden Camira would be higher. At 1,998 cc (4 cylinders), 1989 Holden Camira is equipped with a bigger engine. In terms of performance, 1989 Holden Camira (114 HP @ 5200 RPM) has 29 more horse power than 2001 Honda Fit. (85 HP @ 5700 RPM). In normal driving conditions, 1989 Holden Camira should accelerate faster than 2001 Honda Fit. With that said, vehicle weight also plays an important factor in acceleration. 1989 Holden Camira weights approximately 60 kg more than 2001 Honda Fit. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Holden Camira (176 Nm @ 3200 RPM) has 57 more torque (in Nm) than 2001 Honda Fit. (119 Nm @ 2800 RPM). This means 1989 Holden Camira will have an easier job in driving up hills or pulling heavy equipment than 2001 Honda Fit.
Compare all specifications:
| 1989 Holden Camira | 2001 Honda Fit | |
| Make | Holden | Honda |
| Model | Camira | Fit |
| Year Released | 1989 | 2001 |
| Engine Position | Front | Front |
| Engine Size | 1998 cc | 1339 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 114 HP | 85 HP |
| Engine RPM | 5200 RPM | 5700 RPM |
| Torque | 176 Nm | 119 Nm |
| Torque RPM | 3200 RPM | 2800 RPM |
| Drive Type | Front | Front |
| Vehicle Weight | 1050 kg | 990 kg |
| Vehicle Length | 4410 mm | 3840 mm |
| Vehicle Width | 1680 mm | 1680 mm |
| Vehicle Height | 1360 mm | 1530 mm |
| Wheelbase Size | 2580 mm | 2410 mm |
