1989 Lancia Delta vs. 1973 Oldsmobile Cutlass
To start off, 1989 Lancia Delta is newer by 16 year(s). Which means there will be less support and parts availability for 1973 Oldsmobile Cutlass. In addition, the cost of maintenance, including insurance, on 1973 Oldsmobile Cutlass would be higher. At 5,736 cc (8 cylinders), 1973 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1989 Lancia Delta (200 HP @ 5500 RPM) has 40 more horse power than 1973 Oldsmobile Cutlass. (160 HP @ 4000 RPM). In normal driving conditions, 1989 Lancia Delta should accelerate faster than 1973 Oldsmobile Cutlass. With that said, vehicle weight also plays an important factor in acceleration. 1973 Oldsmobile Cutlass weights approximately 323 kg more than 1989 Lancia Delta.
Because 1989 Lancia Delta is four wheel drive (4WD), it will have significant more traction and grip than 1973 Oldsmobile Cutlass. In wet, icy, snow, or gravel driving conditions, 1989 Lancia Delta will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Oldsmobile Cutlass (380 Nm @ 2400 RPM) has 82 more torque (in Nm) than 1989 Lancia Delta. (298 Nm @ 3000 RPM). This means 1973 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 1989 Lancia Delta. 1973 Oldsmobile Cutlass has automatic transmission and 1989 Lancia Delta has manual transmission. 1989 Lancia Delta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1973 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.
Compare all specifications:
1989 Lancia Delta | 1973 Oldsmobile Cutlass | |
Make | Lancia | Oldsmobile |
Model | Delta | Cutlass |
Year Released | 1989 | 1973 |
Engine Position | Front | Front |
Engine Size | 1995 cc | 5736 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 200 HP | 160 HP |
Engine RPM | 5500 RPM | 4000 RPM |
Torque | 298 Nm | 380 Nm |
Torque RPM | 3000 RPM | 2400 RPM |
Engine Bore Size | 84 mm | 103.1 mm |
Engine Stroke Size | 90 mm | 85.9 mm |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1291 kg | 1614 kg |
Vehicle Length | 3900 mm | 5280 mm |
Vehicle Width | 1690 mm | 1960 mm |
Vehicle Height | 1370 mm | 1370 mm |
Wheelbase Size | 2480 mm | 2960 mm |