1990 Alfa Romeo 33 vs. 2010 SsangYong Stavic
To start off, 2010 SsangYong Stavic is newer by 20 year(s). Which means there will be less support and parts availability for 1990 Alfa Romeo 33. In addition, the cost of maintenance, including insurance, on 1990 Alfa Romeo 33 would be higher. At 2,696 cc (5 cylinders), 2010 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2010 SsangYong Stavic (163 HP @ 4000 RPM) has 55 more horse power than 1990 Alfa Romeo 33. (108 HP @ 5800 RPM) In normal driving conditions, 2010 SsangYong Stavic should accelerate faster than 1990 Alfa Romeo 33. With that said, vehicle weight also plays an important factor in acceleration. 2010 SsangYong Stavic weights approximately 789 kg more than 1990 Alfa Romeo 33. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 SsangYong Stavic is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 SsangYong Stavic. However, in wet, icy, snow, or gravel driving conditions, 1990 Alfa Romeo 33, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 SsangYong Stavic (342 Nm @ 2400 RPM) has 194 more torque (in Nm) than 1990 Alfa Romeo 33. (148 Nm @ 4500 RPM). This means 2010 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1990 Alfa Romeo 33. 2010 SsangYong Stavic has automatic transmission and 1990 Alfa Romeo 33 has manual transmission. 1990 Alfa Romeo 33 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 SsangYong Stavic will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1990 Alfa Romeo 33 | 2010 SsangYong Stavic | |
| Make | Alfa Romeo | SsangYong |
| Model | 33 | Stavic |
| Year Released | 1990 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1712 cc | 2696 cc |
| Engine Cylinders | 4 cylinders | 5 cylinders |
| Engine Type | boxer | in-line |
| Horse Power | 108 HP | 163 HP |
| Engine RPM | 5800 RPM | 4000 RPM |
| Torque | 148 Nm | 342 Nm |
| Torque RPM | 4500 RPM | 2400 RPM |
| Engine Bore Size | 87 mm | 86.2 mm |
| Engine Stroke Size | 72 mm | 92.4 mm |
| Engine Compression Ratio | 9.5:1 | 18.0:1 |
| Top Speed | 190 km/hour | 174 km/hour |
| Acceleration 0-100mph | 9.4 seconds | 13.8 seconds |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 7 seats |
| Number of Doors | 5 doors | 5 doors |
| Vehicle Weight | 1134 kg | 1923 kg |
| Vehicle Length | 4080 mm | 5130 mm |
| Vehicle Width | 1620 mm | 1830 mm |
| Vehicle Height | 1360 mm | 1920 mm |
| Wheelbase Size | 2480 mm | 3010 mm |
| Fuel Consumption Overall | 6.3 L/100km | 9.9 L/100km |
| Fuel Tank Capacity | 50 L | 80 L |
