1990 Alpine A 610 vs. 1958 Peugeot 203

To start off, 1990 Alpine A 610 is newer by 32 year(s). Which means there will be less support and parts availability for 1958 Peugeot 203. In addition, the cost of maintenance, including insurance, on 1958 Peugeot 203 would be higher. At 2,975 cc (6 cylinders), 1990 Alpine A 610 is equipped with a bigger engine. In terms of performance, 1990 Alpine A 610 (248 HP @ 5750 RPM) has 204 more horse power than 1958 Peugeot 203. (44 HP @ 4500 RPM). In normal driving conditions, 1990 Alpine A 610 should accelerate faster than 1958 Peugeot 203. With that said, vehicle weight also plays an important factor in acceleration. 1990 Alpine A 610 weights approximately 294 kg more than 1958 Peugeot 203. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Alpine A 610 (357 Nm @ 2900 RPM) has 279 more torque (in Nm) than 1958 Peugeot 203. (78 Nm @ 2500 RPM). This means 1990 Alpine A 610 will have an easier job in driving up hills or pulling heavy equipment than 1958 Peugeot 203.

Compare all specifications:

1990 Alpine A 610 1958 Peugeot 203
Make Alpine Peugeot
Model A 610 203
Year Released 1990 1958
Engine Size 2975 cc 1288 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 248 HP 44 HP
Engine RPM 5750 RPM 4500 RPM
Torque 357 Nm 78 Nm
Torque RPM 2900 RPM 2500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1414 kg 1120 kg
Vehicle Length 4430 mm 4540 mm
Vehicle Width 1780 mm 1620 mm
Vehicle Height 1200 mm 1680 mm