1990 Alpine A 610 vs. 1983 Fiat 131

To start off, 1990 Alpine A 610 is newer by 7 year(s). Which means there will be less support and parts availability for 1983 Fiat 131. In addition, the cost of maintenance, including insurance, on 1983 Fiat 131 would be higher. At 2,975 cc (6 cylinders), 1990 Alpine A 610 is equipped with a bigger engine. In terms of performance, 1990 Alpine A 610 (248 HP @ 5750 RPM) has 178 more horse power than 1983 Fiat 131. (70 HP @ 5500 RPM). In normal driving conditions, 1990 Alpine A 610 should accelerate faster than 1983 Fiat 131. With that said, vehicle weight also plays an important factor in acceleration. 1990 Alpine A 610 weights approximately 389 kg more than 1983 Fiat 131. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Alpine A 610 (357 Nm @ 2900 RPM) has 249 more torque (in Nm) than 1983 Fiat 131. (108 Nm @ 3000 RPM). This means 1990 Alpine A 610 will have an easier job in driving up hills or pulling heavy equipment than 1983 Fiat 131.

Compare all specifications:

1990 Alpine A 610 1983 Fiat 131
Make Alpine Fiat
Model A 610 131
Year Released 1990 1983
Engine Size 2975 cc 1367 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 248 HP 70 HP
Engine RPM 5750 RPM 5500 RPM
Torque 357 Nm 108 Nm
Torque RPM 2900 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1414 kg 1025 kg
Vehicle Length 4430 mm 4270 mm
Vehicle Width 1780 mm 1660 mm
Vehicle Height 1200 mm 1390 mm